公告:"海達" 品牌正式升級為 "海優測" 聲明公告 / 我們的使命:讓每一家企業擁有高品質的檢測儀器
產品展示
PRODUCT DISPLAY
技術支持您現在的位置:首頁 > 技術支持 > 辦公桌椅綜合測試儀檢測項目介紹一
辦公桌椅綜合測試儀檢測項目介紹一
  • 發布日期:2013-01-14      瀏覽次數:1438
    • 歡迎您光臨本站,了解和學習家具、兒童用品等測試標準。您是海達儀器第8888位尊貴的客人,歡迎來海達儀器做客,指導工作。

       

      辦公桌椅綜合測試檢測項目介紹一:

      辦公桌椅綜合測試,辦公桌椅綜合試驗機,辦公桌椅綜合檢測設備

      椅子測試儀器                                      

      測試項目:座面,靠背。                              

      座椅座面的試驗方法

      Test Method for Seat Chair and seat surface:

      1.座面的靜載荷試驗:通過加載塊垂直向下施加一定力量于加載點上并保持至少10秒。并反復進行10次。

      Seat Surface Static Load Test:

      vertically down through the loading block to exert force on the load point and keep at least 10 seconds. And repeated 10 times

      2.座面的疲勞試驗:通過載入墊,將950N的力和規定的次數垂直向下重復施加在座面載入點上。加載速率為每分鐘不超過40次。

      Fatigue test of the seat: by loading pad, put 950N force and the specified times to repeat vertically down impose to the load point of the seat surface. Loading rate no more than 40 times per minute

      3.座面的沖擊試驗:將一塊泡沫塑料放在座面上,然后把座面沖擊器置于規定的高度,使其自由跌落,沖擊載入部位各10次。

      Impact test of the seat: put a piece of foam on the seat surface, then place the impactor of the seat in a specified height and make it fall freely. impact loading site 10 times each.

      座椅靠背的試驗方法:

       Test methods for back of the chair

      1.座背的靜載荷試驗:用擋塊靠住椅和凳子的腳上。然后將規定的平衡載荷施加于座面載入點上。再將規定的力沿著與椅背垂直的方向通過載入墊施加于載入點上。每次至少保持10秒。并反復進行10次。

      Static Load Test for back of the chair: put the baffle on the chair leg. Then impose the specified balance loading to the load point of the seat. And then provides the force perpendicular to the direction along the back pad by loading imposed on the load point. To keep at least 10 seconds each. And repeated 10 times.

      2.座背的疲勞試驗:用擋塊靠住椅或者凳子的腳上,然后將950N的力垂直施加在座面載入點上,再通過椅背載入塊,將330N的力按規定的次數施加在椅背的載入點上。加載速率為每份鐘不超過40次。

      Fatigue test of the seat back : use the block fixed the feet of the chair and then impose the 950N force vertically to the surface load point, through the back loading block. Impose 330 N force with specified times to the back loading site. Loading rate no more than 40 times per minute.

       

      東莞海達儀器有限公司專業生產(供應)銷售家具檢測儀器設備、自行車試驗設備、嬰兒車測試儀器、兒童玩具各種標準測試儀中使用的檢測儀器等系列產品,如辦公家具測試儀、床墊檢測設備、沙發壽命試驗機、口動玩具疲勞試驗機、玩具檢測儀器、自行車檢測儀器設備等,公司具有良好的市場信譽,專業的銷售和技術團隊,主營產品眾多歡迎大家,全國:/

       

      海達儀器主打相關產品: 辦公家具檢測測試儀器設備 ,辦公桌椅檢測試驗儀器

       

      文章來源: 東莞海達儀器   版權所有,如需轉載請注明來源出處

      公司:

       

    聯系方式
    • 總機

      0769-88838200

    • 手機

      13602382905

    在線客服

    儀表網

    推薦收藏該企業網站

    粵公網安備44190002002729號